10
b. Drawing of connections for use of the wired remote control
4.3 Gas cylinder connection
Hand tighten the gas connection pipe valve on the gas cylinder.
4.4 Positioning of the tray to the ground
Positioning the fire tray on a flat surface, so that the water level is equal everywhere.
Place it so that the cable of the remote control and the gas supply hose are opposite to the wind
direction.
Do not fill the water tray at this stage.
4.5 Gas supply hose connection
Hand tighten the gas supply hose connection. Perform the same operation on the desk with
the other end of the gas supply hose.
Connect the tray to the control desk without creating elbow during the implementation of the gas
supply hose.
Gas hoses to connect gas
cylinders and desk
Reinforced supply gas hose
Wired remote control directly
plugged on the tray
WIND DIRECTION
