117
13. STATUS DISPLAY
13. STATUS DISPLAY
13.1 Status Screen Description
To display the status, press STATUS.
Figure 13-1 Status screen description
Table 13-1 Status screen description
Item
Display
Description
SIGNAL
Whether or not an SDI signal is being received through one of the SDI input
connectors is displayed.
“NO SIGNAL” may appear even when an SDI signal is being applied if the
signal amplitude is small or if there is a lot of jitter.
If “NO SIGNAL” appears, the rest of the information listed below will be
blank.
DETECT
When an SDI signal is being received
NO SIGNAL When an SDI signal is not being received
FORMAT
The status of video signal format detection is displayed. What the display
indicates differs depending on whether the input format on the SYSTEM
menu is set to AUTO or MANUAL.
If “UNKNOWN” appears, the rest of the information listed below will be
blank.
Reference 5.1, “Setting the Input Format”
NORMAL
When a signal in a compatible format is being received (AUTO)
When a signal in the specified format is being received (MANUAL)
UNKNOWN When a signal in an incompatible format is being received (AUTO)
When a signal in a format other than the specified format is being received
(MANUAL)
TRS
The TRS error detection result is displayed.
An error occurs when the EAV and SAV in the input signal are not in their
correct positions.
