31
5. SYSTEM SETTINGS
F•1
F•1
SYSTEM → F•1 FORMAT → F•2 i/PsF SELECT: INTERLAC / SEG.FRM
SYSTEM → F•1 FORMAT → F•3 STREAM SELECT: 3G-B_S1 / 3G-B_S2
5.
SYSTEM SETTINGS
The system settings can be used to configure the LV 5333 settings.
Press SYSTEM, and use the SYSTEM menu.
→
Figure 5-1 SYSTEM menu
5.1
Setting the Input Format
To set the input format, press
FORMAT on the SYSTEM menu.
→
FORMAT →
Figure 5-2 FORMAT menu
5.1.1
Selecting the Detection Method
To select whether to detect the input format automatically or to set it manually, follow the
procedure below.
Procedure
5.1.2
Selecting the Display Format
Even if you set
following formats.
MODE to AUTO, the LV 5333 will be unable to distinguish between the
• 1080i/60 and 1080sF/30
• 1080i/59.94 and 1080sF/29.97
• 1080i/50 and 1080sF/25
When
MODE is set to AUTO, to select whether to display using interlaced or segmented
frame, follow the procedure below.
Procedure
5.1.3
Selecting the Stream
When
MODE is set to AUTO and the input signal is 3G-B-DS, to select the stream to
display, follow the procedure below.
Procedure
SYSTEM → F•1 FORMAT → F•1 MODE: AUTO / MANUAL
F•1
F•1
F•1
SYSTEM
SYSTEM
