5. REMOTE CONTROL
7
5. REMOTE
CONTROL
5.1
Command Format
●
Connection Port
Port number
23
Login name
root
Password None
●
Transmission Commands
Insert a space between a command and a parameter and between two parameters.
The number of parameters varies depending on the command. (Some commands do not
have any parameters.)
Command + Space + Tx parameter 1 + Space + Tx parameter 2 +
・・・
+ CR
●
Response Messages
The number of parameters varies depending on the response. (Some responses do not
have any parameters.)
If there is an error in a transmission command, the LT 6280A returns an “ERR” response.
Command + Space + Rsp. parameter 1 + Space + Rsp. parameter 2 +
・・・
+ CR
●
Connection Example
As an example, the connection procedure using command prompt is indicated below.
>telnet 192.168.0.2
Type “telnet,” a space, and the IP address (changeable).
arago login: root
Type “root” for the login name.
>
From this point, send the available commands.
