Leader LT 4600A, Instruction Manual, Page: 78 / 114

11. AES/EBU DIGITAL AUDIO OUTPUT (AES/EBU SETTING)
68
11.4 Selecting the Pre-emphasis Mode
To select the pre-emphasis mode, follow the procedure below.
２．ＥＭＰＨＡＳＩＳ
□５０／１５ □ＣＣＩＴＴ ■ＯＦＦ
Procedure
AES/EBU SETTING
→
AES/EBU 1 → EMPHASIS: 50/15 / CCITT / OFF
11.5 Settings Shared by Channels
You can link the channel 2 setting to the channel 1 setting by following the procedure below to
select ON. It is possible to set the channel 2 setting even when this is set to ON, but the value
will be ignored.
４．ＥＱＵＡＬ ＴＯ ＣＨ１
□ＯＮ ■ＯＦＦ
Procedure
AES/EBU SETTING
→
AES/EBU 1 → CH SELECT → CH2 SETTING →
EQUAL TO CH1: ON / OFF
11.6 Selecting the Frequency
To select the frequency of the selected channel, follow the procedure below.
４．ＦＲＥＱＵＥＮＣＹ

＊１ｋＨｚ
Procedure
AES/EBU SETTING
→
AES/EBU 1 → CH SELECT → CH* SETTING →
FREQUENCY: SILENCE / 400Hz / 800Hz / 1kHz
11.7 Setting the Level
To set the level of the selected channel, follow the procedure below.
４．ＬＥＶＥＬ
－２０ ｄＢＦＳ
Procedure
AES/EBU SETTING
→
AES/EBU 1 → CH SELECT → CH* SETTING → LEVEL: -60 - -20 - 0