16
8. FAILURES
PROBLEMS :
QUESTIONS :
SOLUTIONS :
The flame ignites then goes out immediately. Cylinder insufficiently full ?
A 13 kg cylinder weighs approx
27,5 kgs. Replace the cylinder.
Nothing happens when the remote control is
operated.
Is the battery charged ?
Change the battery.
Gas is not emitted (there is no sound). Or,
the spark is started off (
no “tac-tac” sound
from the igniter).
Is the cylinder open?
Open the cylinder.
Is the gas control valve at 0?
Put the gauge betwen 0 and 1.
The gas flows but does not ignite.
The bath is full of gas?
Wait a few moments to ventilate.
There is water between the
electrodes?
Tap the bath to remove the water
droplet.
Has powder been used for
extinction?
The electrodes are encrusted. Wash
with water and dry with compressed air.
Can the “tac-tac” be heard
of the igniter?
If no, the igniter is possibly burnt. If so,
change is needed by our engineer.
Summary of Contents for GF 42
Page 1: ...GF 42...
Page 27: ...26...
