©MMXVI - LEADER LIGHT – All right reserved
Edition: A - 2016
Additional information on [email protected]
LEADER LIGHT s.r.o.
M.Gorkeho 33
052 01 Spisska Nova Ves
Slovakia
www.leaderlight.eu
USER MANUAL
Symbol
Pin
Wire Colour
Screw (US)
L
live
brown
yellow or brass
N
neutral
blue
silver
ground (earth)
yellow/green
green
!
!
Non-minimum distance and / or non-use the original brackets is at your own risk!
Luminaire must be connect to Driver! Never connect direct to main power!
Page 1 /2
ENVIRONMENTAL PROTECTION
Do not throw away the appliance with the normal household waste at the end of its
life, but hand it in at an official collection point for recycling. By doing this, you help to
preserve the environment.
01 SAFETY INFORMATION
WARNING!!!
Carefully read before installing, powering or servicing. Nothing to do if
anything misunderstand! Installation can be done only by a qualified
professional in accordance with relevant local codes.
01.1 Risk of eyes damage
-
Do not look directly into LED lamps.
-
Do not look into light beam from a distance of less than 40 cm (16 inches)!
01.2 Safety instructions
-
Shut down power before installation or maintenance.
-
Do not modify, alter, or attempt to service the LEADER LIGHT appliance. Doing
so will void the warranty.
-
Appliance and recommended AC power supply must be installed by a qualified
professional in accordance with relevant local codes. Use only acceptable source
of AC power and frequency that complies with local biulding and electrical codes.
-
Use only the recommended voltage source.
-
Appliance always connect to earth (eltech.)!
- Do not use or do not connect the products if the power cable, power plug or
fixtures are any way damaged, wet, or if they are overheating.
-
Before removing or installing any cover or part of appliance disconnect it from AC
power.
-
AC power supply must be protected against overvoltage and short circuits.
01.3 Fire protection
-
Follow all safety restrictions.
-
Thermostatic switches or fuses never to bypass.
- Device and
ventilating slots never shield.
Around the axis of the fitting (180°)
must be maintained space for cooling. Minimum distance from the surrounding
objects must be 100mm (4 in.).
-
LEDs never direct cover with filters or other materials.
-
Allowing max. ambient temperature is 40°C (104°F).
-
Luminaries never use without mounting brackets. The housing never install directly
to the surface.
02 PRODUCT SPECIFICATION
02.1 Technical specification
LL SPORT 4K luminaire
Power connection:
use only with LL SPORT DRIVER, Input withe XLR 4 pin
IP:
IP20 or IP 67 on request
Ambient temp. (Ta):
Standard: -30 ºC < T
a
< +40 ºC; Optional: +55 °C
Net weight:
250 W: 6,5 kg, 500 W: 13 kg, 750 W: 20 kg withou Driver
Installation:
on surface/pendante with bracket
LL SPORT DRIVER DMX:
Power connection:
AC 90 – 305 V, 47– 63 Hz;
setup time 15 ms,max. Inrush current 75 A / 240 V AC
IP:
Control:
IP20
DMX
Ambient temp. (Ta):
Standard: -30 ºC < T
a
< +40 ºC; Optional: +55 °C
Net weight:
250 W: 2,1 kg, 500 W: 3,6 kg, 750 W: 5,2 kg withou bracket
Installation:
on surface or luminaire
!
LL SPORT 4K ... with DMX DRIVER
COMPLIMENTS ON YOUR PURCHASE!
Package includes:
- LL SPORT 4K with adjustable bracket
1pc.
-
User manual
1pc.
Additional items needed:
- Data and power cables
-
LL SPORT DRIVER DMX
-
Mounting accessories as necessary
- DMX controler
Content:
01
SAFETY INFORMATION
01.1
Risk of eyes damage
01.2 Safety instructions
01.3 Fire protection
02
PRODUCT SPECIFICATION
02.1 Technical specification
02.2 Product description
03
INSTALLATION
03.1 Unpacking
03.2 Physical installation
03.3 Connection
03.4 Control data connection
04
MAINTENANCE AND SERVICE
02.2 Product description LL SPORT DRIVER
03 INSTALLATION
03.1 Unpacking
-
Unpack carefully.
-
This is electronic equipment and should be handled carefully.
- Damaged delivered package or if are any mechanical parts broken – it must be
claim immediately by the transport company. Photo pictures as evidence are
valuable for future claim.
03.2 Physical installation
- Loading capacity of bearing area has to be at least 10 times the weight of all
device clusters.
-
Hairbreadth from combustible materials is 0,5m.
03.3 Connection
-
Respect all SAFETY INFORMATION 01!
- Connect the ground (earth) !
-
Connect the luminaire with Neutrik Speokon 4 pin to Driver lum. input.
It is not necessary to open the Driver box before power supply
-
The fixture is equipped with auto-switching power supply that automatically
adjusts to any 47-63Hz AC power source from 90-305V.
- Cord plug connections:
DRIVER 500W
DRIVER 250W
DRIVER 750W
AC 90 – 305 V,
47– 63 Hz
cable input 1,5
m long
250 W / 500W / 750 W:
1x / 2x / 3x
cable 1,5 m long with NL4F
input to Driver
DMX In
Neutrik
NC5F
DMX In
Neutrik
NC5F
DMX In
Neutrik
NC5F
DMX Out
Neutrik
NC5M
DMX Out
Neutrik
NC5M
DMX Out
Neutrik
NC5M
2 x Output to 250W luminaire
Neutrik Speakon 4 pin
NL4M
1 x Output to 250W luminaire
Neutrik Speakon 4 pin
NL4M
3 x Output to 250W luminaire
Neutrik Speakon 4 pin
NL4M
AC 90 – 305 V,
47– 63 Hz
cable input 1,5
m long
AC 90 – 305 V,
47– 63 Hz
cable input 1,5
m long
600 mm
275 mm
255 mm
600 mm
355 mm
496 mm
600 mm
735 mm
405 mm
LL SPORT 4K Luminaire
