Leader Electronics Corp. LT 416, Instruction Manual, Page: 23 / 50

4.4 Composite Video Signal
4.4.1 VIDEO OUTPUT connector
(1) Preset Output Level
When the OUTPUT LEVEL control
!4
is set to PRESET position, the output level
between sync tip and 100 % white is 1 Vp-p (into 75
Ω
).
Figure 4-1 Preset position
(2) Variable Output Level
The output level can be set from 0 V (MIN, immediately before the detent
position) to the preset level (MAX) by rotating the OUTPUT LEVEL control
!4
.
Clockwise rotation increases output level.
4.4.2 Fixed VIDEO OUTPUT Connector
!1
The output level between sync tip and 100% white is 1 Vp-p (into 75
Ω
) regardless of
the OUTPUT LEVEL control
!4
setting.
4.5 Component Video Signal
4.5.1 Y, B-Y, R-Y Connectors
!9
Use the Y, B-Y, R-Y connectors
!9
to output Luminance and color difference signals.
Output levels are fixed regardless of the LEVEL control
!4
.
The SECAM color signals (B-Y, R-Y) are not output.
4.5.2 R, G, B, C.SYNC Connectors
@0
Use the R, G, B, C.SYNC connectors
@0
to output R, G, and B signals. The C.SYNC
is used to synchronize the R, G, and B signals. Output levels are fixed regardless of
the LEVEL control
!4
.
The SECAM only outputs C.SYNC.
4-3
!4
LEVEL