LEAD FLUID BT100S, Operation Manual

Page: 14 / 32

BT/S Variable-Speed Peristaltic Pump
manufacturer or distributor.
2) Read through the instruction .
3) There should be more than 200 mm space for the back of the pump
when it is running.
7.2 Power Connection
The voltage of the power supply should be marked on the sticker of the
pump. Please make sure to use the right power source for the pump.
Please plug the power cord into the IEC Power Connector on the rear of the
pump and plug the opposite end of the power cord into an electrical outlet.
Flip the power switch located on the rear of the pump.
7.3 Mode Change
Turn on the power switch. The display will show welcome message then
show the main screen. Press the MODE key to change the working mode
( Figure 10 ).
Int
32.5rpm
Ext V
32.5rpm
Disp
32.5rpm
lev1
32.5rpm
lev2
32.5rpm
Figure 10. Change Working Mode
11 Tel ： 0312-3250677 3250877 3250977 Fax ： 0312-3250877-804