8.5 Connecting the remote display
The remote display shows the charge status of the battery via an LED.
To connect the remote display, proceed as follows:
1. Plug the connecting cable for the remote display into the connector for the
remote display of the charger.
ð
The remote display is connected.
9 Operation
9.1 Switching on the unit
To switch on the unit, proceed as follows:
1. Connect the mains plug to a 230 V mains supply.
ð
Charging starts automatically.
ð
The unit is switched on.
9.2 Charging the battery
The charger begins to charge the battery as soon as it is switched on.
19
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
LEAB Automotive GmbH
9 Operation
