LEAB Clayton Power G3 Combi 1012-50, User Manual

Page: 18 / 24

User Manual Control Displays and Error Descriptions
Page 17 of 22
11 Control Displays and Error Descriptions
Blue LED Description
Steady light Inverter in operation

…..

…..

…..

…..

…..
Start mode – Load adjustment

..

..

….......................
Output overloaded

..

..

……........... Operating temperature too high
(automatic cooling and restart)

..

..

……..
Short-circuit at the inverter output

..

..

Short-circuit in the power supply

..

..

Overload in the power supply during the
start process
Green LED Description
Steady light Charging status: U
2
phase
Slow flashing Charging status: U
1
phase
Fast flashing Charging status: I phase

…..

…..

…..

…..

…..

Supply voltage (AC) too low (< 185 V)

No sine-wave voltage present

..

..

…....................... Supply voltage (AC) too high (> 265 V)
Red LED Description
Off Battery voltage OK
Steady light Battery voltage low
To prevent battery draining, the device
switches off as soon as the battery
voltage drops below 10.3 V.

..

..

..

..

..

..

..

Battery voltage too high
Red and green LED Description

..

..
 
Failure of the external temperature
sensor (NTC)

If no external NTC is connected, the
signal appears for 20 s after switching
on the supply voltage (AC).