Installation instructions
Installation
Page 9 of 18
7
Installation
The lithium-ion battery can be used in a variety of ways. This chapter
describes the most common installations.
Single operation with APP power supply
To connect the lithium-ion battery in single operation to 12V or
24 V consumers, you need a suitable power pack. LEAB recommends an
APP series power pack. To connect the APP and the
12 V or 24 V consumers, perform the following steps:
For installation you need an installation relay. LEAB
recommends the Eltako R12-110-230V relay
(part no.: 9905043791).
Before installing, make sure that the power pack is turned
off.
The wiring diagram shows the lithium-ion battery connected to a
power pack.
