background image

 DANGER

Danger that will lead to severe injury or death
Safety instructions with the signal word 

Danger

 indicate a hazard

which, if not avoided, will result in death or severe injury. Read
the safety instructions carefully and follow them to avoid the

hazard.

You will find useful tips and tricks in certain parts of the manual. These ap-

pear as follows:

TIP

Tips provides additional, useful information.
Read the tip carefully and follow the instructions where

applicable.

2 Safety

This manual will help you to handle the device safely. Use the device solely in
accordance with its intended use. Observe the safety instructions.
The charger is a trickle and battery charger for permanent installation in

vehicles. This charger can be used to charge all types ofLead-acid batteries
(wet, gel, AGM).
Any modifications to the device or its components are prohibited and do not

conform to its intended use. Keep this manual is a place where it can be ac-
cessed quickly.

2.1 Intended Use

The charger is designed for permanent installation in vehicles with 12 or 24 V
on-board power systems for charging Lead-acid batteries (wet, gel, AGM). It is

suitable for charging and trickle charging auxiliary batteries. The device is de-

signed for a temperature range of -30 °C ... 60 °C. Do not charge batteries with
this charger outside the specified temperature range. At higher temperatures,

the output power of the charger automatically decreases.

4

LEAB Automotive GmbH

Thorshammer 6

24866 Busdorf

2 Safety

LEAB Automotive GmbH

Summary of Contents for 0101033351





















Reviews: