WARNING
WARNING
WARNING
WARNING
WARNING
Do not r
Do not r
Do not r
Do not r
Do not remove the outer case until power has been
emove the outer case until power has been
emove the outer case until power has been
emove the outer case until power has been
emove the outer case until power has been
disconnected fr
disconnected fr
disconnected fr
disconnected fr
disconnected from the machine.
om the machine.
om the machine.
om the machine.
om the machine.
Maintenance and Car
Maintenance and Car
Maintenance and Car
Maintenance and Car
Maintenance and Care of Y
e of Y
e of Y
e of Y
e of Your Show Mist Pr
our Show Mist Pr
our Show Mist Pr
our Show Mist Pr
our Show Mist Pro
o
o
o
o
It is important for the Show Mist Pro to receive basic periodic maintenance. It must be
remembered that the machine runs at extremely high temperatures, and although
thermostatically controlled, the machine will benefit from being unplugged WHEN NOT IN USE.
Please observe the following recommendations:
❑
check internal tubes for any leaks (3 month intervals)
❑
clean the filter one a year or when required
❑
periodically ensure all connections are tight
Befor
Befor
Befor
Befor
Before Requesting Ser
e Requesting Ser
e Requesting Ser
e Requesting Ser
e Requesting Service
vice
vice
vice
vice
Check the following points if you are having trouble with your Show Mist Pro.
Low Fog Output
Low Fog Output
Low Fog Output
Low Fog Output
Low Fog Output
❑
check remote variflow level - adjust as required
No Fog Output
No Fog Output
No Fog Output
No Fog Output
No Fog Output
❑
check fluid level
❑
check internal fuse
Show Mist Pr
Show Mist Pr
Show Mist Pr
Show Mist Pr
Show Mist Pro will not power up
o will not power up
o will not power up
o will not power up
o will not power up
❑
check that power plug is completely plugged
into AC outlet
Machine tur
Machine tur
Machine tur
Machine tur
Machine turns of
ns of
ns of
ns of
ns off smoke early
f smoke early
f smoke early
f smoke early
f smoke early
Machine 'pulses'
Machine 'pulses'
Machine 'pulses'
Machine 'pulses'
Machine 'pulses'
❑
check to ensure duration time has been
selected and interval is above '0'
❑
check that duration control is set to desired time
*If your still experiencing problems contact your local dealer. Giving an accurate description of the trouble will
ensure prompt service.
