www.lemaitrefx.com
3.) Connect the remote cable connector to the 3 pin XLR located
on the rear panel of the Neutron XS.
4.) Power up the Neutron by selecting
On
at the Mains switch.
5.) The Power Indicator on the Neutron Re
mote should be illuminated at this time.
The Power Indicator remains illuminated
as long as the Neutron Remote is receiv-
ing power, it does not duplicate the
flashing of the Monitor Led.
6.) Start haze output by selecting
On
at
the Haze switch on the Neutron
Remote.
Pinout for 3 Pin XLR
Pin 1 - Remote Signal
Pin 2 - GND
Pin 3 - +12V
The D.M.X. Interface (Part #
CLF
3320
)will allow D.M.X. 512 Protocol
to activate the Haze output of the
Neutron XS Haze machine.
See the publication included with the
D.M.X. Interface for operating instruc-
tions.
Note
Service Note
D.M.X. Interface
6
