In DMX mode, the SELECT switch does not function, and all control is via DMX. If ‘DOF’ (DMX OFF) appears on the
display, then a proper DMX signal is not being received. Selecting ‘SMOKE’ before switching to DMX will allow the
display to show a response to the connected DMX signal data variation.
By setting, in manual mode, the USE DMX channels to ‘NO’, these channels can be used by other equipment
without affecting the G300MkIII.
To restore Manual mode operation from switch on, just press Manual and Store buttons and wait for the
status LED to blink.
When heating from cold (approximately 6 minutes for maximum performance), the display will indicate
‘Heating up’ and the heat exchanger temperature until the minimum working temperature is reached.
(Ready To Operate in approximately 4 minutes). At this point, if the Select position is on SMOKE, and the
output is set to maximum, then the actual available output will be indicated.
At the SMOKE display position, the left LED digit ‘bars’ will indicate three levels of heat exchanger
temperature. Low = 1 bar, Medium = 2 bars, High = 3 bars. At the ‘settling’ temperature, at which maximum
performance is available, the horizontal and vertical bars will flash alternately.
Warranty
The Le Maitre® Ltd G300MkIII is sold with a one year’s warranty, which includes parts and labour, from the
date of purchase. This warranty covers manufacturing defects, providing that the unit has been regularly
serviced by an authorized agent and has only used genuine Le Maitre® fluid.
Le Maitre® Ltd considers all of its products to be safe for use in the application for which they are intended.
Le Maitre® Ltd takes no responsibility for misuse or incorrect use. Always refer to the equipment owner’s
manual for proper use, and be aware of local legislation governing the products use.
Unit 6, Forval Close, Wandle Way, Mitcham, Surrey, CR4 4NE. ENGLAND.
Tel: 020 8 646 2222 Fax: 020 8 646 1955
www.
lemaitreltd
.com
