4. AUTOMATIC FILLING
•
Make sure the burner is electricity connected.
•
Make sure burner is leveled before processing.
•
Press the hatch located on the front right-hand side as you face the burner.
•
Insert one end of the fuel hose into the fuel tank nipple.
•
Insert the opposite end into the bottle of bioethanol fireplace fuel.
•
Press button illuminated in blue, located below the nipple.
•
When completed, filling automatically stops.
•
If you want to fill a smaller amount of bioethanol for testing the device. Please refer to the burner’s
minimum trigger level.
•
Carefully remove the hose from both the nipple and the bottle. Wipe of any fuel spillage.
•
Press power button TWICE within 10 seconds to ignite burner.
•
Close the hatch.
AUTO FILL IN NIPPLE
PRESS BUTT
ON TO
START A
UTO FILLING
7