DigitalBooster DB-4 – Manual
-
3
-
2. DB-4 connection to the Digital-Command-Station or to other
Booster:
The
galvanic separated boosterbus connections
enables the application of the
DigitalBooster DB-4
in connection with
several command stations
by using the
5-poles Boosterbus
, the
CDE-Boosterbus
or the
Roco-Boosterbus
.
The
DB-4
is no
Booster-Adapter
. A change of the bus-system is impossible. The
booster-bus
used for the connection of the
first DB-4
to the
digital command station
has to be
used furthermore
.
The below
table
indicates the
possible connections
to the
available command
station
.
5-poles
Boosterbus
CDE-
Boosterbus
Roco-
Boosterbus
Control Unit
X
Central Station 1
X
X
Central Station 2
X
Central Station 3 and 3 plus
X
Mobile Station 2 with Track Box
X
ECoS 1 (50 000)
X
X
ECoS 2 (50 200)
X
X
Intellibox 1
X
X
IB-Basic
X
IB-COM
X
Intellibox 2
X
X
EasyControl / RedBox
X
X
DiCoStation
X
KeyCommander
X
TWIN-CENTER
X
X
Roco 10761 (multiMAUS)
X
Roco 10764 (multiMAUS)
X
Fleischmann 680801 (multiMAUS)
X
Roco / Fleischmann
multiZENTRALEpro
X
Roco / Fleischmann z21 and Z21
X
Lenz Digital plus LZ100
X
Lenz Digital plus LZV200
X
Viessmann Commander
X
X
2.1. DB-4 connection via the 5-poles Boosterbus:
The
DigitalBooster DB-4
can be connected by use of
the 5-poles boosterbus cable
(
order code: Kabel Booster 1m, Part-No.: 000123
), to one of the command stations as
per above table or to other boosters (e.g. DB-4, DB-2, 6015, 6017, Power 2, Power 3).
The first booster shall be always connected to the command station by use of a 5-poles
boosterbus cable. The second booster shall be connected to the first one and so on.
