Cetra F & PC 100 LED User’s Manual – 1.0
Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy
Tel. +39 0376 771 777 – fax +39 0376 772 140 – email
– web www.ldr.it
5
4.4 DMX FREQUENCY CONTROL (DMXCfg):
If turned ON it allows to remotely control the LED Frequency or the strobe speed through a dedicated DMX channel.
Factory setting
OFF.
4.5 LOST DMX SIGNAL (DMXMem):
In case of signal failure this function allows to store in memory the last DMX value. Factory setting
ON
.
Three options are available :
4.6
STROBE
(Strobe):
This function enables to activate the strobe function . Factory setting
DISABLE
.
4.7 STROBE SPEED (SetStr) :
It allows to set the strobe speed. This menu is not active when the strobe function is disabled or when it is remotely
controlled through DMX (required
DMXCfg
function enabled). Factory setting
OPEN
.
3 8/16b
8 BITS
PRESS THE ROTARY
SELECTOR TO
ACTIVATE
3 8/16b
8 BITS
←
3 8/16b
16 BITS
TURN TO SELECT
MANUAL OR DMX
AND PRESS TO
CONFIRM
4 DMXCfg
OFF
PRESS THE ROTARY
SELECTOR TO
ACTIVATE
4 DMXCfg
OFF
←
4 DMXCfg
ON
TURN TO SELECT
MANUAL OR DMX
AND PRESS TO
CONFIRM
PRESS TO ACTIVATE
THE MENU AN
ARROW SHOULD
APPEAR
5 DMXMem
ON
LAST SCENE HOLD
1 Mode
ON
←
5 DMXMem
OFF=80%
DIM THE LED TO 80%
OF ITS MAXIMUM
POWER
5 DMXMem
OFF=0%
DIM THE LED TO 0%
6 Strobe
DISABLE
6 Strobe
DISABLE
←
6 Strobe
ENABLE
TURN TO SELECT
MANUAL OR DMX
AND PRESS TO
CONFIRM
PRESS TO ACTIVATE
THE MENU AN
ARROW SHOULD
APPEAR
PRESS TO ACTIVATE
THE MENU AN
ARROW SHOULD
APPEAR
7 SetStr
OPEN
WITH STROBE ENABLE
THE LIGHT IS SET TO
ON
7 SetStr
OPEN
←
7 SetStr
SPEED #
CHOOSE THE STROBE
SPEED VALUE FROM
1(SLOW) TO 10 (FAST)
7 SetStr
CLOSED
WITH STROBE ENABLE
THE LIGHT IS SET TO
OFF
