Astro 250 HP 3200K and 5600K, DMX 512+ RDM LED followspot - User’s Manual – 1.0
Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy
Tel. +39 0376 771 777 – fax +39 0376 772 140 – email
– web www.ldr.it
7
11.5 STROBE (Strobe):
This function enables to activate the strobe function. Factory setting is DISABLE.
11.6 STROBE SPEED (SetStr) :
It allows to set the strobe speed. This menu is not active when the strobe function is disabled or
when it is remotely controlled through DMX. Factory setting is OPEN.
11.7 DIMMING CURVE (Curves)
This function allows to select a response curve for the Astro LED. A choice of two curves is available:
Square and Linear. Factory setting is SQUARE.
11.8 CUT OFF DIMMING RESPONSE (CutOff) :
This function allows to select the LED behaviour simulating a tungsten or halogen lamp during the
dimming cut off.
Factory setting is SLOW.
5
Strobe
DISABLE
5
Strobe
DISABLE
←
5
Strobe
ENABLE
←
TURN TO ENABLE OR
DISABLE STROBE AND
PRESS TO CONFIRM
PRESS TO ACTIVATE
THE MENU
AN ARROW SHOULD
APPEAR
PRESS TO ACTIVATE
THE MENU
AN ARROW SHOULD
APPEAR
6 SetStr
OPEN
PRESS TO ACTIVATE
THE MENU
AN ARROW SHOULD
APPEAR
7 Curves
SQUARE
PRESS TO ACTIVATE
THE MENU
AN ARROW SHOULD
APPEAR
8 CutOff
SLOW
WITH STROBE ENABLE
THE LIGHT IS SET TO ON
6 SetStr
OPEN
←
6 SetStr
SPEED #
←
CHOOSE THE STROBE
SPEED VALUE FROM
1(SLOW) TO 10 (FAST)
6 SetStr
CLOSED
←
WITH STROBE ENABLE
THE LIGHT IS SET TO
OFF
SQUARE TO INCREASE
VOLTAGE RESPONSE AT
LOWER VALUE
7 Curves
SQUARE
←
7 Curves
LINEAR
←
LINEAR DIMMING
CONTROL
SOFT LED DIMMING AT
SHUT DOWN
8 CutOff
SLOW
←
8 CutOff
FAST
←
DIRECT DIMMING
RESPONSE AT SHUT
DOWN
