PAGE 6
Rear Panel
The rear panel of the Z-11ProII features five connectors.
ANT connector:
Connect the 50-ohm coax antenna feedline to this standard SO-239
connector.
GND connector
(wing nut): Connect to antenna system ground.
TX connector:
Connect a 50-ohm coax jumper cable from this standard SO-239 connector
to the ANT jack on the back of the transceiver.
RADIO connector:
Connect the optional radio interface cable to a compatible transceiver.
Power connector
(coax DC jack): Connect the supplied DC power cable to a source of DC
power, 7 to 16 volts DC, 300 mA. Center pin is positive.
Summary of Contents for Z-11ProII
Page 8: ...PAGE 8...