background image

 

 

PAGE  26

 

RETURNING YOUR  PRODUCT  FOR SERVICE 

Returning  a  product  to  LDG  is  easy.  We  do  not  require  a  return  merchandise  authorization, 

and  there  is  no  need  to  contact  LDG  to  return  your  product.  Visit  the  LDG  web  site  and 
download  the  LDG  Product  Repair  Form.  On  the  Repair  Form  tell  the  LDG  technicians  exactly 
what  happened  or  didn’t  happen  and  why  you  believe  the  product  needs  servicing.  The 
technician  attempts  to  duplicate  the  problem(s)  you  had  based  on  how  well  you  describe  it  so 
take the time  to be accurate  and complete.   

Ask  your  shipper  for  a  tracking  number  or  a  delivery  verification  receipt.  This  way  you  know 

the  product  arrived  safely  at  LDG.  Be  sure  to  give  us  your  email  address  so  our  shipper  can  alert 
you  online  when  your  product  is  en-route  back  to  you.  Please  be  assured  that  our  staff  makes 
every  effort  to complete  repairs  ahead of our  published  wait  time.  Your  patience  is  appreciated.   

Repairs  can  take  six  to  eight  weeks,  but  are  usually  faster.  The  most  recent  information  on 

returning  products  for  service  is  found  on  the  LDG  website  under  Support,  then  Tech  Support. 
Send your  carefully  packaged  unit  with  the  Repair  Form  to: 

 

 

LDG  Electronics,  Inc. 

Attn:  Repair  Department 

1445 Parran  Rd 

St. Leonard,  MD 20685

 

 

PRODUCT  FEEDBACK 

We  encourage  product  feedback!  Tell  us  what  you  really  think  of  your  LDG  product.  In  a 

card,  letter,  or  email  (preferred)  tell  us  how  you  used  the  product  and  how  well  it  worked  in  your 
application.  Send  along  a  photo  or  even  a  schematic  or  drawing  to  illustrate  your  narrative.  We 
like  to  share  your  comments  with  our  staff,  our  dealers,  and  even  other  customers  at  the  LDG 
website: 

 

http://www.ldgelectronics.com

 

 

Summary of Contents for AT-600Pro



























Reviews: