PAGE 4
SPECIFICATIONS
•
1.0 to 250 watt power range (SSB and CW), 100W on 6M.
•
Over 4,000 memories for instantaneous band changing.
•
Built-in 2-port antenna switch, with 2,000 memories each.
•
Tuning time 0.2 to 15 seconds full tune, 0.2 seconds memory tune.
•
1.8 to 54.0 MHz coverage. Built-in frequency sensor.
•
Tunes 6 to 1,000 ohm loads (16 to 150 on 6m), 6 to 4,000 ohms with optional 4:1 balun.
•
LED bargraph displays power level, SWR, and status.
•
Antenna Indicator LED shows the currently selected antenna.
•
Bypass Indicator LED
•
User-selectable operating parameters: Auto/Semi, 250/25 watt scale, and more.
•
Optional Radio interface cables for Icom and Yaesu are available.
•
Power requirements: 11 to 16 VDC @ 1A max.
•
Dimensions: 10.5” x 8.5” x 2.8” Weight 2 pounds, 12 oz. (1.23 kg)
AN IMPORTANT WORD ABOUT POWER LEVELS
The AT-200ProII is rated at 250 watts maximum power input
at most
. Many amplifiers
output well over 250 watts. Power levels that significantly exceed specifications will definitely
damage or destroy your AT-200ProII. If the tuner fails during overload, it could also damage
your transmitter, amplifier, or transceiver. Be sure to observe the specified power limitations.
IMPORTANT SAFETY WARNING
Never install antennas or transmission lines over or near power lines. You can be
seriously injured or killed if any part of the antenna, support, or transmission line touches
a power line. Always follow this antenna safety rule: The distance to the nearest power line
should be at least twice the length of the longest antenna, transmission line, or support
dimension.
Summary of Contents for AT-200PROII
Page 8: ...PAGE 8...
