Led indicators of EVAC or ALERT will turn on when a message is being played in any zone.
b ) “SELECT EMIC ZONES” for activation of EMIC in the selected zones.
Select the zones and press the PTT button in the EMG microphone to broadcast the
announcement. The EMIC led will turn on indicating it is possible to start the live
announcement. In case the ding-dong option was activated, the led will blink until the sound
finishes. The zone selection will be activated until the selection is disabled or until the
emergency state is reset.
In order to make a new selection, first the current selection must be cleared. The button
“CLEAR EMIC ZONES” will be displayed. Once pressed, the “SELECT EMIC ZONES” option
will appear again and a new selection can be made.
c ) “EMG SEQUENCES” for loading an emergency sequence or emergency event.
This option allow the activation of pre-de fined evacuation sequences. This menu will
show the ID numbers of the VA events created in the con figuration software. For
activate/deactivate the event press the desired number and OK to con firm.
NOTE: The zone selection of an emergency pre-recorded message or live message will be
cleared once a new selection is made.
3.2.3 STOPPING VOICE ALARM
To stop broadcasting an evacuation message, re-enter the " EMERGENCY STATE", as
described in chapter 3.2.1, the active emergency source will show in a band of selection. Click
on the available option to stop the message. The button will change to normal state, without
band selection. For stopping the emergency microphone just release the PTT button.
You can also stop the broadcast by disabling the emergency state ( see 3.2.4)
3.2.4 DEACTIVATING THE EMERGENCY STATE
To disable the emergency state, press the" RESET" button, it will appear on the access
control for users with level 2 (see 2.3). To return, press the" BACK" button. If you successfully
complete the access control, the state of emergency will be disabled. All emergency warning
broadcasts, will be stopped.
3.2.5 EMERGENCY STATE LOG
The system has a log that records the operations or indications made during the
Emergency state. The emergency state log will be displayed on the screen automatically when
the equipment / system is being remotely activated. It will show the log for one hour since the
last entry occurred in the log. A whole year's log will be accessible through the con figuration
application .
Once the log has been checked, press the" ACK " button and the log will automatically
stop being displayed. You can access the record again by pressing the button ”EMERGENCY
LOG" in the EMG state. A list of records will be showed in chronological order from newest to
oldest operations and indications that have occurred. To exit the emergency state log, press the
"BACK" button.
To view all issued logs, use the scroll control up and down to scroll the window. You
can see an overview of all logs in Appendix B: Content of logs.
3.2.1 VOICE EVACUATION ZONE VOLUME ADJUSTMENT
The equipment/system has an independent adjustment of the volumes of voice
evacuation zones. If this setting is not de fined, the volume in this state, will be the same as
con figured in the paging mode (see 3.5.1).
To set the volume, adjust the volume through the con figuration application or according
to chapter 3.5.1. Once the setting has been made, use the con figuration application to
memorize it as the default volume for the emergency state.
20
www.lda-audiotech.com
User's Manual: EN 54-16 PA/VA System LDA NEO