LD MAUI28SE, User Manual

Page: 7 / 88

REAR VIEW :
1 POWER CONNECTOR WITH FUSE HOLDER
Always make certain that the operating voltage of the powered subwoofer (printed on the rear panel) mat-
ches the mains voltage in your region An appropriate mains cord is included in the package.
IMPORTANT INFORMATION: Always replace the fuse only with a fuse of the same type with the same rating
(printed on the rear panel). If the fuse blows repeatedly, please contact an authorised service centre.
2 POWER SWITCH
Before switching the powered monitor on or off, always adjust the volume to zero (turn the knob all the way
to the left).
3 LINE INPUT
Balanced line input left / right: XLR / 6.3 mm jack combo
Unbalanced line input left / right: RCA sockets
4
LINE OUTPUT - BALANCED XLR OUTPUT LEFT / RIGHT
Used to loop through the signal from the line inputs.
5 SUB LEVEL
Volume control for the MAUI28SE subwoofer. To attain the same volume with the subwoofer of the MAUI28
column system and the MAUI28SE subwoofer, set the system volume (MAIN LEVEL) of the MAUI28 column
system to approximately 2 o'clock (Figure A). Now move the SUB LEVEL volume controls (Figure B) to the
same position to adjust the MAUI28 and MAUI28SE subwoofers to the desired volume.
ADJUSTMENT EXAMPLE
MAIN
LEVEL
SUB
LEVEL
SUB
LEVEL
6 ON LED
Lights up when the subwoofer is switched on and properly connected to the power mains.
7
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
DEUTSCH
ENGLISH
MAIN LEVEL MAUI28 SUB LEVEL MAUI28SE SUB LEVEL MAUI28
A B B