
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
13
70
AUX 3 POST CHANNEL 21/22 AND 23/24
Volume controller for adding the signal from channel 21/22 and 23/24 to an external effects device (Effect Send, Post Fader). Use the line output
AUX SEND 3 (N 12) for activation.
71
LEVEL DFX / AUX 4 POST CHANNEL 21/22 AND 23/24
Volume controller for adding the signal from channel 21/22 and 23/24 to the internal digital effects device (effect send, post fader). Use the line
output AUX SEND 4 (N 12) for activating an external effect. When using the AUX SEND 4 jack socket, the internal effects device is automatically
bypassed, and is therefore not usable.
72
BAL CHANNEL 21/22 AND 23/24
Use the balance controller to set the relative volume between the left and right part of the connected stereo signal.
73
MUTE CHANNEL 21/22 AND 23/24
To mute a channel, press down on the MUTE switch of the corresponding channel. The MUTE LED of the selected channel then lights up.
When disabling the mute function, the MUTE LED goes out.
74
FADER CHANNEL 21/22 AND 23/24
Volume controller for channels 21/22 and 23/24. Push the Fader button upwards to increase the volume of the corresponding channel and
downwards to decrease it.
75
SIGNAL-LED CHANNEL 21/22 AND 23/24
The signal LED lights up as soon as an audio signal is present at the corresponding channel (depending on the input level and setting of the gain or
input sensitivity - GAIN).
76
CLIP-LED CHANNEL 21/22 AND 23/24
Once the red Clip LED lights up, the corresponding channel is operating at the distortion limit. Adjust the Gain controller (N 61) so that the Clip LED
of the corresponding channel only lights up briefly when signal peaks occur. Avoid the permanent lighting of the Clip LED by reducing the input gain
or input sensitivity; if necessary, reduce the volume of an external audio device.
77
GR 1/2 CHANNEL 21/22 AND 23/24
Press down on the GR 1/2 switch to add the corresponding channel to the channel group 1 (BAL all the way to the left), to the channel group 2 (BAL
all the way to the right), or to both groups of channel groups 1 and 2 in the same proportion (BAL in central position). The signals of the channels
grouped together in one group are routed simultaneously to the corresponding line outputs GROUP OUT 1/2. The total volume of the resulting group
is adjusted using the volume controller GROUP 1/2 (N 104); if the audio signals of the group are to be routed to the MAIN MIX sum channel, press
down on the L-R switch (N 105).
78
GR 3/4 CHANNEL 21/22 AND 23/24
Press down on the GR 3/4 switch to add the corresponding channel to the channel group 3 (BAL all the way to the left), to the channel group 4 (BAL
all the way to the right), or to both groups of channel groups 3 and 4 in the same proportion (BAL in central position). The signals of the channels
grouped together in one group are routed simultaneously to the corresponding line outputs GROUP OUT 3/4. The total volume of the resulting group
is adjusted using the volume controller GROUP 3/4 (N 106); if the audio signals of the group are to be routed to the MAIN MIX sum channel, press
down on the L-R switch (N 107).
79
L-R CHANNEL 21/22 AND 23/24
To route an input channel (channel 21/22 and 23/24) directly to the MAIN MIX sum channel, press down on the L-R switch of the corresponding
channel.
80
PFL CHANNEL 21/22 AND 23/24
Press down on the PFL switch (Pre Fader Listening)
firstly
, to be able to listen to the signal of the respective channel regardless of the channel level
controller (N 74) using headphones connected to the headphone jack PHONES (N 82),
secondly
, to make a more accurate gain adjustment since
the level of the input signal is now displayed on the 12-segment LED display of the MAIN MIX sum channel (reduce the level of the input signal
when the CLIP LED lights up on the corresponding GAIN controller). At the same time, the PFL LED of the corresponding channel and the PFL LED
below the level display of the MAIN MIX sum channel light up. If the PFL switch is brought to its original position, the PFL LED will go out.