LQ-9101
User Manual
------------------------------ -------------------------------------------------
Documentation The expression of the main parameters in the middle refers to the significant
components of the impedance properties in the impedance real and imaginary components, and the
secondary parameter refers to another component. For example, a 100K ohm resistor is connected in
series with a 1 nanohenry inductor. The impedance property at the test frequency is significant, and it is
called the main parameter.
This article also uses the table terms for the primary and secondary parameters. The primary
parameters are L, C, R, and Z. The secondary parameters are Q, D, and θ.
The DCR, DC resistance measurement mentioned in this document is essentially the same as the 0Hz
measurement used in this device. Measurement status: refers to normal measurement usage. Test state: For
debugging purposes, the output effective number of digits is more than the measurement state, but the font
is small. Otherwise, it is the same as the working state of the bridge.
Level: Refers to the three levels of 0.1V, 0.3V, and 0.6V in this device.
Measurement method: refers to the three different ways of body socket, external Kelvin clip, and external
meter pen provided with this device.
2017/06/01 VER.H VER.K
页
22 / 22
