LQ-9101
User Manual
Figure 16
Step 5 “Turn on the serial port” opens the used serial port number
Step 6 When the bridge is off, press and hold the F and E buttons simultaneously to turn on the power.
○
○
A drop of sound, the bridge no longer enters the working state, without any display, then enters the ready
communication state.
Step 7 Type the command in the "character input box" of the serial debugging program. If the update is a
program, enter "F?" , Click “Send” button, the receiving window returns “Ready to write FLASH..”; If
the updated data is calibration data, enter the command “E?”, click “Send” button, and the receiving
window returns “Ready to write EEPROM.”
Step 8 Click the "Send File" button and the bridge is automatically restarted after the bridge is
downloaded.
The above process can be restarted from the first step regardless of the failure of that link.
Note: Do not experiment with update operations unless necessary.
Chapter 6 The quadratic function control
The four function keysbridge are pressed and turned on at the same time. Each key gives different
functions.
6.1 F key + boot
○
can be used normally measured, the difference is not clear operation. When short-circuiting or open-
circuiting, the displayed result is the inherent residual capacity of the bridge, the inherent residual
