2
Scope of delivery
LCN-GT6 (LCN-GTS6), mounting plate, 2 screws 3,2 x 15mm & inlay sheet (blank).
How it functions
The
sensor keys
of the LCN-GT6 (LCN-GTS6) react to a touch on the glass surface.
Depending on the duration of touch, an appropriate LCN-control command (
Hit, L
ONG
or
R
ELEASE
) will be sent. When no changes are made to the default key settings, (see page 5:
Key mapping), the keys work on the A table according to their numbering.
There is the possibility to trigger off 2
additional keys,
through touching two keys at
the same time. Key A1+A6=D7 and A2+A5=D8.
This kind of double touching is especially suitable for functions, that should not be
accidentally triggered. (central-off, switching the alarm system, etc)
The integrated
temperature sensor
supplies the measured values with a triggering from
0,1°C, and thanks to its adaptive average calculation, practically noiseless.
The 6
Status-LED´s
in the sensor areas are individually controlled over the T-Port and
configured over the LCN-PRO (O
N
, O
FF
, B
LINKING
, F
LICKERING
).
An external power supply is needed when operating the
key background LED´s
and the
®
Corona -surrounding light
(please order LCN-NUI seperately). The application of a
power supply is also meaningful with a brighter environment; It increases the brightness of
all the LED´s on the LCN-GT6 ( LCN-GTS6 ).
LCN-GTS6
®
Installation guide
LCN-GT6
®
