additif ST GB
05/01/2007
LCJ CAPTEURS - ZA le Chêne Férré 44120 VERTOU – Tel 33.(0)2.40.05.08.55 – [email protected]
CV3F-ST Option
Connect blue wire « rotavecta » to terminal B of the ST connector block
Connect red wire « rotavecta » to terminal R of the ST connector block
Connect the 12V (10 to 14) supply. Blue - / Brown +
Connect the coaxial cable of the CV3F sensor correctly connecting the core and screening.
Power up the instrument then follow the procedure in the “User calibration” of display
user manual
Connect the display receiver equipment to the NMEA connector:
- for the COM(1) port of an RS232 computer
connect Rx terminal 2 of COM1
to the AUX connector block terminal A
connect 0V terminal 5 of COM1
to the ALIM (SUPPLY) connector block terminal 0V
if necessary, connect terminals 6 and 7 of COM1 together.
PC SUBD 9 terminal
COM1 type connector - Soldering side
- for a floating RS422 standardised NMEA 183 input
Make sure in advance that none of the receiver inputs is attached to 0 Volts, otherwise use the RS232 type connection.
connect terminal A of the AUX connector block to +Ve ( or In +) or A of the NMEA display
connect terminal B of the AUX connector block to -Ve ( or In -) or B of the NMEA display
12 V
0 V Blue
CV3F Core
Screening
OUT + NMEA
OUT - NMEA
Red “Rotavecta” ST60
Blue “Rotavecta” ST60
L=131mm
W=58mm
H=37mm
1 2 3 4 5
6 7 8 9
