18
lci1.com
574-537-8900
Rev: 03.09.18
Solera
®
Destination Awning
Installation and Owner’s Manual
(For Aftermarket Application)
CCD-0001255
Ground Support Introduction
The Solera Ground Support gives added support to the
Solera Awnings as well as Carefree Awnings and Dometic
Awnings. Additional information about this product can be
obtained from
www.lci1.com/support
or by downloading
the free MyLCI app. The app is available on iTunes
®
for iPhone
®
and iPad
®
and also on Google Play
™
for
Android
™
users. iTunes
®
, iPhone
®
and iPad
®
are registered
trademarks of Apple Inc. Google Play
™
and Android
™
are
trademarks of Google Inc.
Installation
Fig.36
Fig.37
1�
Measure the length of the roll tube
(Fig.36)
.
center of roll tube
MOVING PARTS CAN PINCH, CRUSH OR CUT� KEEP
CLEAR AND USE CAUTION�
Resources Required
• Tape measure
•
7/16
” wrench
• Cordless or electric drill or screw gun
• Appropriate drive bits
• Non-permanent method of marking
•
3/8
” drill bit
• Hammer
2�
Find the center of the roll tube and mark its location
(Fig.37)
.
3�
Position the Ground Support assembly bracket at the
center of the roll tube
(Fig.38)
.
NOTE:
Keep the pull strap slot clear so accessories can be
used with the Ground Support assembly installed.
IF STAKING GROUND SUPPORT SHADE TO THE
GROUND, BE SURE TO DISABLEANY ANDALL SELF
RE-TRACKING WIND SENSING OPTIONS ON YOUR
AWNING� FAILURE TO DO SO COULD RESULT IN
DAMAGE TO THE AWNING AND UNIT�
