4
574-537-8900
Rev: 10.29.20
PowerStance
™
3500
Tongue Jack
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002675
Installation
1.
Carefully slide the jack leg
(Fig.2A)
through the hole in
the coupler
(Fig.2B)
on the trailer A-frame
(Fig.2C)
.
Fig.2
2.
Align the three holes in the PowerStance Tongue Jack
mounting plate
(Fig.3A)
with the three holes in the
coupler
(Fig.3B)
.
Fig.3
3.
Secure the PowerStance Tongue Jack to the coupler
plate with the three provided
3/8
” - 16 x 1” bolts
(Fig.4A)
.
Fig.4
4.
Connect the red power wire from the PowerStance
Tongue Jack housing to a grounded 12V power supply on
the trailer. The PowerStance Tongue Jack is wired through
its 30A fused circuit.
5.
Loom the harness wires
(Fig.2D)
with the appropriate size
and length to protect the wires from damage.
6.
Reattach the footpad
(Fig.1C)
to the jack leg
(Fig.1D)
by
sliding the footpad back over the bottom of the jack leg and
securing it with the clevis pin
(Fig.1B)
and hairpin cotter pin
(Fig.1A)
previously removed.
A
B
C
A
B
A
ALL ELECTRICAL WIRING HARNESSES SHALL BE
LOOMED AND SECURED TO PREVENT POSSIBLE
DAMAGE AND INSTALLED IN ACCORDANCE WITH
RVIA ELECTRICAL STANDARDS.
D
