4
lci1.com
Rev: 04.27.21
Lippert BottleCheck (AU)
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004234
Checking Tank Level
Callout
Fig. 6 Descriptions
A
Battery life of sensor
B
Signal strength between app and sensor
C
Quality of sensor’s measurement
A.
The app will report when the tank is empty (
Fig.5
).
Fig.3
A
B
Operation
B.
The app will report to the user the battery life of the
sensor, communication signal strength between the
app and the sensor, and other features for the user’s
convenience (
Fig.6 and 7
).
C
Fig.4
Fig.5
Rubber Pad
Magnets
Place sensor here
6.
Place the magnetic sensor on underside of the tank in
the center. Tank removal may or may not be necessary
depending on accessibility to the bottom (underside) of the
tank (
Fig.4
).
Fig.6
NOTE:
If the BottleCheck is removed or repositioned
multiple times, it may be necessary to apply more sonic
grease.
7.
Once the sensor is placed and the fluid has settled, the
app will display a reading.
NOTE:
If the tank was flipped during the application of the
sensor, the LPG fluid will be sloshing around in the tank for
a few minutes and the quality of the measurements will be
reduced until this has stabilized.
8.
If tank was removed for the application of the sensor,
safely return tank back to its original location.
4.
Once the app and sensor are paired, wipe off the bottom
of the tank where the sensor will be magnetically mounted.
5.
Apply the provided Sonic Grease directly to the rubber
pad on the center of the sensor before attaching to the
tank (
Fig.3
).
