Rev: 11.27.19
Page 10
CCD-0002711
Manual Override
In the event of loss of power, the LCI Above Floor Slide-out (Vertical Motor) system can be manually
operated as follows:
Always disconnect battery from system prior to manually operating system. Failure to disconnect
battery can cause electricity to back feed through the motor and cause serious damage to the
system as well as voiding the warranty.
1.
Before accessing the power unit, make sure power to the system has been disconnected.
2.
Access the out-stop assembly (Fig. 7). Out-stops are located on the outer edge of the drive and
follower rails.
NOTE:
The slide-out out-stop assembly will be accessible from the inside of the unit. The slide-out motor
and mechanism are accessible from the outside.
3.
Using a 15/16" wrench or socket/ratchet combination, rotate the 5/8" hex head manual override (Fig. 8)
to manually extend or retract the slide-out.
Fig. 7
Drive Rail
Assembly
In-stop
Out-stop