LC-POWER LC-HEAD-1B, User Manual

Page: 7 / 19

LC-HEAD-1B/W
Notes: Not all mobile phones support all functions listed above. Please refer to the user manual of
your mobile phone.
Some functions and indication tones may vary with different mobile phones.
When the volume is adjusted to maximum or minimum level, you will hear an indication tone.
For some mobile phones, when you press the key of accepting a call on the phone, the conversation
will be sent to the mobile phone first. At this time, you can switch the call to the headphones by
using the MFB (multifunction button) or through operating accordingly on the mobile phone. Please
refer to the user manual of your mobile phone for further information.
8. Playing music
When the headphones connect with the mobile phone or Bluetooth transmitter which supports
A2DP, you can enjoy music through your headphones wirelessly.
Function Status of
headphones Operation
Pause Playing music Shortly press key
Play Pausing Shortly press key
Previous title Playing music Shortly press key
Next title Playing music Shortly press key
Volume up Playing music Push wheel button upward
Volume down Playing music Push wheel button downward
Notes: For some mobile phones, while playing music, the music will be transmitted to the speaker
of the mobile phone. You have to choose “transmit the sound through Bluetooth” in the “settings” of
your music player interface, then choose “LC-HEAD-1” in the device list and the music will be
transmitted to the headphones. Please refer to the user manual of your mobile phone for further
information.
When the volume of the headphones is adjusted to maximum or minimum, you will hear an
indication tone.
To operate the function of previous title/next title/pause/revert by remote control, it is necessary
that your mobile phone or Bluetooth transmitter support AVRCP. Please refer to the user manual of
your mobile phone or Bluetooth transmitter for further information.
9. Restoring to factory defaults and resetting
Make sure the headset is turned off, press and hold the MFB button and wheel buttons
simultaneously for about 3 seconds, release them when you see that the red LED is on for 1 second,
now the headphones restore to factory defaults and all pairing information will be deleted. Make
sure the headphones are charged before resetting them.
9.1 LED indicator - Charging
LED indicator Status of the headphones
Red LED is on Charging
Red LED is off Charging finished
Red and blue LEDs blink alternately Pairing mode
Blue LED quickly blinks once every 2 seconds Not connected to a device
7