LC Packings Probot 161403, User Manual

Page: 67 / 118

Installation and Getting Started
User’s Manual Probot
D960R3
2-47
2.8.7 Default Calibration and Acceleration Settings
The setup of the calibration and acceleration parameters is important for a proper
operation of the Probot Micro Fraction Collector (FIGURE 2-49). In the case of a
malfunction of the table drive or the syringe drive (e.g. noise, slow movement,
position errors) check if all the settings are correct.
To check if the calibration and acceleration parameters are properly, select the
Settings option from the Tools menu. Then select the Robot or Dosage Module
tab (FIGURE 2-49).
FIGURE 2-49 The Robot and Dosage Module Setup - default Settings