LC Packings Probot 161403, User Manual

Page: 50 / 118

Installation and Getting Started
2-30
D960R3
User’s Manual Probot
2.8.2 Create a New Tray using the Tray Setup Wizard
If the required tray is not predefined, it has to be created. The Tray Setup Wizard
assists you in creating a new tray setup as well as modifying an existing one.
a) Open the Tray Editor by clicking the TrayEditor icon, and then select the New
button.
b) The Confirm message box will be presented. Choose Yes (FIGURE 2-28) if
you are willing to lose any unsaved data. If you want to keep the existing
tray and tasks setup, quit with Cancel and start the wizard form the File
menu ( New / Tray ).
FIGURE 2-28 Confirm Discarding the Tray and Tasks
c) The welcome screen of the Tray Setup Wizard is presented (FIGURE 2-29).
Select the ‘Make a new tray … ‘ option and confirm with the Next button.
FIGURE 2-29 Tray Setup Wizard – Welcome Screen
d) In the first step, select the sample carrier(s) you want to use from the
available sample carriers (FIGURE 2-30). If you want to place only one carrier
choose the Next button and continue with step f).