LC Packings Probot 161403, User Manual

Page: 52 / 118

Installation and Getting Started
2-32
D960R3
User’s Manual Probot
f) If you want to add another sample carrier, or if you want to define a waste
or a wash position, select the Add another sample carrier option and repeat
the steps above (FIGURE 2-32).
FIGURE 2-32 Tray Setup Wizard – 6 Sample Carriers added
g) To finish the wizard and to save your setup, select the Exit tray wizard …
option (FIGURE 2-32). Alternatively, you can start the Sample Carrier
Alignment Wizard (Section 2.7.3) or the Fractionation Application Wizard
(Section 2.8.4).
2.8.3 Modify an Existing Tray Setup using the Tray Editor
The Tray Editor offers more options than the Tray Setup Wizard . It is an ideal
tool for experienced users or if only small changes of existing tray setups are
required. You can add and delete sample carriers and change their positions on
the tray table.
To modify an existing tray setup:
a) Load the tray setup that needs to be modified (FIGURE 2-33).