2
Install the Transformer
1A
CROSSBAR
#8-32 FLAT
HEAD SCREW
Remove the two #8-32 flat head screws to remove the
crossbar.
1
1
1
1B
#8-32
SCREW
CROSSBAR
Mount the crossbar to the electrical box with the provided
two #8-32 screws.
2
2
2
CAUTION:
Turn the power to electrical box off!
1D
Slide the transformer onto the crossbar.
Align the transformer holes with the crossbar holes; replace
and tighten the two #8-32 flat head screws.
6
#8-32
SCREW
7
7
7
6
1C
SAFETY WIRE
CROSSBAR
BRACKET
4
5
5
Hook the transformer safety wire onto the backplate bracket.
Connect the backplate to a suitable ground in accordance with
local electrical codes.
For each set of power line wires, connect the hot and neutral
wires to the black and white transformer wires, respectively.
3
4
5
NOTE:
All transformer power line wires must be
connected to the same phase.
3