Page 10
PROTECTOR® IV Top of Rail Installation, Operation & Maintenance Manual
ELECTRICAL POWER (AC POWER)
AC Electrical Power and Battery Charger Connections
1. Remove the bolts on the battery terminals using a 10 mm socket or wrench. Look at battery and charger
safety precautions. Be careful not to short the battery terminals with a tool.
2. Through the terminal bolt, connect the ring terminals of red wire from the charger and from the control
box power harness to the positive battery terminal (+) and in the same manner connect the black wires to
the negative battery terminal (-).
3.
!" #$%&'()*" )&)+,-'+'%." /$0," 1'-)" ,2)" $.',0" ,2-3$42" ,2)" 5$.+,'3." 637" %.*" 3.,3" ,2)" 3.839" *'0+3..)+," 637"
according to local regulations.
ALL WIRING MUST COMPLY WITH LOCAL AND NATIONAL ELECTRICAL CODES. USE ONLY THE WIRE
SIZES SPECIFIED IN THE INSTALLATION INSTRUCTIONS. WE RECOMMEND HAVING THE INSTALLATION
WIRED BY A CERTIFIED ELECTRICIAN.
ENSURE POWER SUPPLY CABLE GAUGE IS PROPERLY SIZED TO ALLOW FOR REQUIRED POWER LEVELS
GIVEN THE DISTANCE FROM THE ORIGINAL SOURCE.
TOR INSTALLATION
!"#$%&'()*"#+()+,'(-.
Top of rail distribution bars should be installed in a
position that agrees with the site selection criteria
mentioned previously in this manual. The common
%./0123")$./&")&)3"%T&8.3&`EUDB-DUE&Ja&2/$)#&$#&./&
>.)4&3"$6#&.8&"&#$/16*&)3"%T&5$)4&2/$G;$3*%)$./"6&)3"K%9&
The set up described here is shown in Figure 2.
The top of rail wiping bars assembly can be installed
$/& "& 8.23& >"3& %./0123")$./@& "#& #4.5/& ">.?*9& D4$#&
<3.?$;*#& 3*H2$3*;& 83$%)$./& +.;$0*3& 8.3& "3*"#& 5$)4&
%./)$/2.2#&%23?")23*@&4$14&)3"K%&"/;&.)4*3&8"%).3#&
3*H2$3$/1& "& +"d$+2+& .8& 83$%)$./& +.;$0*39& D4*&
installation time required depends on the installer’s
familiarity with components and labor available to
complete the task.
/)01'+!"#$%&'()*"#2
• Two bars with single pump with distribution in center.
• Two bars with double pump and supply hoses routed from tank to bars.
A PASSING TRAIN CAN DAMAGE IMPROPERLY INSTALLED COMPONENTS. ALLOW SUFFICIENT TRACK
TIME TO FULLY COMPLETE INSTALLATION.
3*%&'1+45+678('+!"#$%&'()*"#
