6FKHPDWLFYLHZRI
ZLULQJ
Step 1
Turn table
right side up, adjust the glides as necessary, and plug the power cord into a 100-240v
outlet.Make
sure
the
length
of
the
plug-in
cord
is
appropriate
to
both
reach
the
outlet,
AND
for
the
distance
the
table
will
travel
up
and
down.
It is important to perform the reset procedure stated below
EHIRUHXVLQJ\RXUWDEOHIRUWKH²UVWWLPH
Range:
2
$$
at
lowest
to
45
''
highest.
!"#$%&
1. Press and hold
ޔ
&
ޕ
simultaneously for more than 3 seconds till legs begin to move
down at half speed of normal operation.
2. Keep pressing buttons till legs move down to the lowest position and rebound 2-5 mm,
then stop.
3. Release together. Reset is completed
%
(a) The reset procedure must be completed after table is installed or parts replaced.
(b) If reset process is interrupted, the system will stop running and will need to be reset to
operate again.
T
Power
C
A
Column
eg
J
S
Control Wires
S
Control
Wires
A
Column
eg
K
Display
