2
1
2
1. Read instructions carefully.
Check that no parts are
missing.
Single Sided
Wrench
Socket Head
Wrench
Electric Drill
do not assume any responsibility for product that is altered in any way.
2. Carefully identify each
component, especially those
that are similar. The most
common mistake is mixing up
the order and placement of
parts.
WARNING:
Failure to follow the assembly instructions in this manual can result in product
damage, or personal injury.
IMPORTANT
:
:KHQSODFLQJWDEOHLQ²QDOORFDWLRQEHVXUHWKHUHLVDPSOHURRPIRUDGMXVWPHQW
around ALL sides, and at the highest (4
”)
and
lowest
(28”)
points
the
table
can
reach.
Make
VXUH
WDEOH
ZLOO
QRW
FRPH
LQWR
FRQWDFW
ZLWK
DQ\
²[HG
REMHFWV
²[HG
WRSV
VWRUDJH
VKHOYLQJ
HWF
while
adjusting.
7KDQN\RXIRUFKRRVLQJ
:HDSSUHFLDWHWKHWUXVWDQGFRQ²GHQFH
\RXKDYHSODFHGLQXVDQGDUHFRPPLWWHGWRSURYLGLQJ\RXWKHEHVW
possible product.
1. As with all power-operated products, please follow instructions closely and handle with
care.
2. When moving tables, please lift the tables, do not drag or tilt the table on one leg as
misalignment may occur.
3. Check that the load on the table does not exceed limits (120
kg
maximum
on
straight).
6.
%HIRUH²UVWXVHSHUIRUPUHVHWRSHUDWLRQ
7. If, after trouble shooting the problem persists, contact Customer Service for further
assistance.
Tools Needed
Introduction
RIIHU DFRPSUHKHQVLYH OLQHRIRI²FH IXUQLWXUH IRUHYHU\ VSDFH DQGUHTXLUHPHQW QRZ
including My-Hite, a height adjustable table that allows for standing or sitting while working.
User Notes
4. The
input
voltage
should
be
within
100-240V.
5. Use
the
glides
to
properly
level
the
table
before
use.Table
should
be
level
and
aligned
at
all
times.
