Layzee Car Port – 4 Post
Layzee Living
London W1W 7LT
info@layzeeliving
02078683959
6
Step 1
Step 2
Begin by taking the wall plates, one at a time, and placing
them horizontally (use a spirit level or laser) on the wall
where you would like the car port located. Ensure the
distance from TOP of the wall plates to the floor matches
that shown on the Panel length table (page 4). Mark the
hole positions for your wall fixings then drill and fix them
into place.
Place one of the posts on a flat surface as shown and then
insert one of the longer runners into the post slot, using
the markings spaced at 95mm apart on the runner as a
guide to align the post. Fix into place with 2 x 60mm
woodscrews.
Step 3
Step 4
Slot another post over the other end of the runner,
aligning with the single mark on the runner top edge and
fix into place with 2 x 60mm woodscrews.
Align a brace with the underside of the runner (at either
end) and centrally across the inside face of the post as
shown. The mating faces should be flat against each other
before fixing the brace into place with a 100mm
coachscrew at each end. Repeat and attach the remaining
brace to the other end of the runner to form a “goal post”
structure.
