U.S. GEAR
11/2019
INSTALLATION INSTRUCTIONS
1. Structure supporting device must be adequate for weight of device.
2. Attach panel to wall using suitable fasteners for mounting conditions, such as
•
expansion or sleeve anchors into concrete
•
sleeve anchors into masonry
•
self-tapping screws into steel framing
•
lag screws into wood framing
On drywall construction, it may be necessary to bridge across studs with a suitable support system.
MAINTENANCE INSTRUCTIONS
1. Replace batteries with the same type every two years or less. [24VDC, 5AH X 1 set (battery X 2)]
2. Check and replace batteries if output voltage is below 19 volts. (Low battery may be indicated by an
audible or visible warning).
WARNING SOUND
CONDITION
SOUND PATTERN
AC Fail
B----B.B., B----B.B.
No Battery
B----B.B.B., B----B.B.B.
Battery Low
B. ,B. ,B.
Battery Fail
B.B.B.B.B.B.B.B.
Charging Fail
B------,B------
Disconnect power supply to the device before servicing.
❖
Inspect and service whenever a malfunction of the device or equipment connected to it is observed
or suspected.
❖
Before servicing, always disconnect power supply to the device.
❖
Replace fuses only with those of the same type and rating.
❖
All replacement parts must be compatible with those originally provided. Consult manufacturer for
replacement parts.
Do not place hands or tools in the device when the power is connected or when
testing the device or equipment connected to it. Always disconnect power before
servicing or adjusting the device or other equipment connected to it.
WARNING
WARNING
2
