crystal User Manual
Version: 6.6.0/2
353/459
19. Configuring Custom Logical Behaviour
19.13
LS Command
"Logic -> LS Command"
A
LS Command
element can be used to change and monitor Triggers on a Line Scheduler (LS).
To use this feature there must be an active TCP/IP connection to a matrix server (single or redundant)
using the
TCP Link
mode
AIF1/2
(defined under “
System -> Definition -> Param = TCPLink
”).
General Parameters
LS Command
Reference name for the element.
Action
Select the action which will happen when the In control input becomes true.
Macro/Template No
Enter the Line Scheduler's Trigger number (usually found under Administration / Trigger
names).
In
Assign an input control signal to trigger the
Action
.
Macro active in
You can assign an input control signal to display the active state.
The control outputs appear under the “Logic -> <GroupName> -> LS Command” branch of the 'Tree Selection'
window:
Macro defined
True when the specified
Macro/ Template No
is used by any macro or template in the LS.
Macro active
True is the macro or template is active.
