4
SPECIFICATIONS
0XIÀHUWRFUDQNFDVH
7LJKWHQWKHEROW0î/VHFXULQJWKHPXIÀHUWR
crankcase.
62-71
7-8
7LJKWHQWKHVFUHZV0î/VHFXULQJWKHPXIÀHU
62-71
7-8
Carburetor mount to
cylinder
Tighten the screws securing the carburetor mount to
cylinder.
35-44
4-5
$LU¿OWHUEDVHWR
carburetor
Pre-screw the nuts (M5) with washers, and then
tighten.
27-35
3-4
Pawl to crankshaft
Pre-screw the pawl assembly to crankshaft, and then
tighten with pneumatic screwdriver.
106-133
12-15
Fuel Tank to crankcase
Tighten the bolt (M5×10L) securing the fuel tank
bracket to crankcase.
18-27
2-3
Electric starter
assembly to engine
body
Tighten the screws (M5×60) securing the electric
starter assembly to engine body.
27-35
3-4
Flywheel cover to
crankcase
7LJKWHQWKHVFUHZV0îVHFXULQJWKHÀ\ZKHHO
cover to crankcase.
53-64
6-7.2
Lower engine cover
Tighten the screws
securing the lower
engine cover.
First, screw (ST3.5×10), cross
head.
2-4
0.2-0.5
6HFRQGEROWV0îKH[
socket head.
27-35
3-4
Upper engine cover
Tighten the screws (M5×35) securing the upper engine
cover.
27-35
3-4
Spark plug cover to
upper engine cover
Tighten the screws
(M5×10) securing
the spark plug
cover to upper
engine cover.
Screw for spark plug cover.
18-27
2-3
Screw for upper engine cover.
27-35
3-4
Tighten the screw (ST3.5×10) securing the upper and
ORZHUHQJLQHFRYHUVRQPXIÀHUVLGH
9-18
1-2
Assist handle to shaft
Tighten the screw (ST3.9×16F) securing the assist
handle ball socket and joint.
9-18
1-2
Throttle-body set to
shaft
Tighten the self-taping screws (ST3.9×16F) securing
the right and left parts of the main handle.
18-22
2-2.5
Tighten the countersunk head self-taping screws
(ST4.8×7) securing the main handle to shaft.
18-22
2-2.5
Shaft connection
sleeve to upper shaft
(Curved split shaft
NPTGCP2617A only)
Tighten the self-taping screw (ST4.8×8) securing the
shaft connection sleeve to upper shaft.
18-22
2-2.5
7LJKWHQWKHKH[DJRQVRFNHWVFUHZî
securing the shaft connection sleeve.
18-22
2-2.5
LED light panel to
starter switch base
Tighten the screw (ST2.2×6F) securing the LED light
panel to starter switch base.
9-13
1-1.5
Tighten the screw (ST3.9×16F) securing the starter
switch pressing plate and the start button.
9-13
1-1.5
Debris guard
mounting bracket to
shaft (Straight shaft
NPTGSS2617A only)
5HPRYHWKHJHDUER[¿UVW7LJKWHQWKHVFUHZVHFXULQJ
the debris guard mounting bracket to shaft.
13-18
1.5-2
