26
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore check the product using this section. In most cases the problem can be solved quickly.
WARNING
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorized service center
or a similarly qualified specialist if you cannot solve the problem yourself!
Problem
Possible Cause
Solution
Mower fails to start.
The carriage bolts are not
seated properly.
Adjust the height of the handle and
make sure the carriage bolts are seated
properly.
The locking knobs are not
tightened.
Tighten locking knobs.
The extension cord is not
connected to the mower
plug.
Reconnect the cord and use the cord
retainer to keep the cord close to the
motor/blade control.
The extension cord is not
connected to the power
source.
Connect the extension cord to a live 120
V AC, 60 HZ AC receptacle.
Tripped circuit breaker in
the house.
Reset house circuit breaker. If it trips
again, call a qualified electrician.
The switch is defective.
Replace the switch or contact sales@
cleva.com.cn for assistance
Mower cuts unevenly.
Lawn is rough or uneven.
Check the mowing area.
Cutting height is not set
properly.
Set the mower at a higher position.
Dull blade.
Sharpen or replace the blade.
Mower does not mulch
properly
Wet grass clippings
sticking to the underside of
the deck.
Wait until the grass dries before mowing.
