9
A STEELFORT PRODUCT
GROUNDING TERMINAL
The grounding terminal is designed to prevent
electric shock by connecting it to the grounding wire.
The generating set must be properly grounded before
operation.
OVERLOAD PROTECTOR
When generator is overloaded or overheated for a
long time, the over-current protector will protect the
output. If it is protected, please lower the load or run
without load for a few minutes, and then press the
button of the over-current protector to restore the
output.
Note: Similar to the circuit breaker, flip the switch
upward to restore the output. The over-current
protector/circuit breaker will be affected by factors
such as operating current and ambient temperature,
so there will be differences in the protection time.
IV. OPERATION
1. OPERATING CHECKLIST
OPERATING LOCATION
Only use this generator OUTSIDE and in well
ventilated areas.
Only operate the generator on a flat, level surface and
in a clean, dry operating environments. Only use the
generator for applications within its operating scope.
If you have any question regarding applicable scope,
please speak to your nearest Service Agent.
In some locations and regions, the generator may
require additional provisions and or regulations for
operation, please consult with your nearest Service
Agent.
DANGER
TOXIC FUMES
The exhaust of the generator contains carbon
monoxide, using the engine indoors may cause
serious personal injury including death. DO NOT use
the generator inside any buildings or within enclosed
spaces EVEN IF doors and windows are open. Place
the generator in a well-ventilated and clean area.
Note the wind direction and airflow when placing the
generator.
HIGH ALTITUDE
This generator may require a high altitude carburetor
kit to ensure correct operation at high altitudes.
Consult with your local authorised LawnMaster dealer
for high altitude kit information if you intend to
operate the generator at altitudes above 5, 000 feet
(1,500 meters).
Summary of Contents for LGBQH9200
Page 21: ...21 A STEELFORT PRODUCT ...
