8
A STEELFORT PRODUCT
CHARGING THE BATTERY
Do not expose the battery to extreme conditions such
as high temperature or shock. Otherwise, it will cause
personal injury due to the leakage of the electrolytic
solution.
Before charging, check that the surface of the
battery is clean and dry.
Before delivery, the battery of this product is not fully
charged. Therefore, before the first use, it must be
sufficient electricity.
Do not charge the battery for long periods of time,
and do not run the battery completely flat, otherwise
it will damage the battery.
The product warranty does not include failure due to
incorrect use. If the battery with sufficient electricity
is significantly shorter, it must be replaced if the
battery is exhausted. The user can only use the
battery pack manufactured by the original equipment
operated by the customer center.
Always keep in mind applicable safety instructions
and protection requirements and environmental
information.
1.
Place the charger on a dry firm surface to
charge the batterCheck that the switch is in off
position.
2.
Connect the charger to the corresponding
connector for the battery pack. Make sure the
power is consistent with the rated values on the
charger and adapter.
3.
When the red light is on the charger, it indicates
that the battery is charging, and the green light
indicates that the charge is completed • the
average charge time is 2 hours.
4.
When charging is complete, drive the connector
from the power source and then cut off the
connector and battery connection.
The battery is used to ensure that it is recharged at
least once every three months
PRECAUTIONS
•
When the device is running, say your other hand
is at least 15cm away from the cutting area of
the blade, and the hand must not be put into the
knife edge.
•
Do not use this equipment to force the bigger
branches, otherwise it may make the blade
deform and make the pruning stick.
•
In cold or humid weather, to protect the battery
pack, put it under waterproof clothing, do not
use this equipment in rainy days.
•
We recommend that after daily use, the con-
nection between the pruning number and the
battery pack must be cut, and the power switch
(8) is closed and put together into the matching
tool box.
•
If the user feels the electricity is not enough or
the cutting is not smooth enough, check if the
electricity is exhausted or the blade is dull.
CLEANING AND MAINTENANCE
•
Repair work functions not mentioned in this
specification are performed by the service
dealer. To ensure safe use, only original parts
can be used.
•
Please close the equipment before starting the
chair repair. Clear the connection between the
battery and the plant and store the battery in a
safe package.
•
Wear hand care when touching safety blades.
This can avoid sharp blade scratching the user.
Follow-up cleaning and maintenance must be
carried out regularly. This ensures long-term
and reliable operation of the equipment.
•
Do not spray the equipment with water or
break it into the water, otherwise, it may cause
electric shock. Keep the ventilator, motor room
and equipment handle clean. Use a damp cloth
or brush cleaner.
•
Do not use a bay cleaner. Otherwise, it may
cause permanent saka failure of the equip
-
ment. Please clean the blade carefully after
each use.
•
Use oily cloth to wipe the blade and absorb the
metal to protect the fog.
•
After 8 hours of continuous operation, please
remove the debris such as dust from the front
turbulent cover plate of the equipment
STORAGE
To ensure that the battery is fully charged, avoid
leaving in extremely hot or cold environments.
If the equipment will not be used for a long time,
please remove the battery before storage.
