LawnMaster GT1415, Operator'S Manual

Page: 11 / 40

ASSEMBLY
Connect the upper and lower shafts together (See Fig. 6 & Fig. 7)
WARNING
Never attempt to lock the trigger lever in the on position.
If the power cord for this equipment is damaged, it must be replaced by
the manufacturer or its aftersales service or similarly trained personnel
to avoid danger.
11
Fig. 6 Fig. 7
Height adjustment (See Fig. 8)
You can set your optimal working position by adjusting the height.
1. Press the lock for the shaft adjustment and keep it pressed.
2. Move the shaft to one of the three locking positions and release the lock.
3. Rotate the shaft through 180° to the left and release the lock.
4. Move the shaft back and forth to ensure that the lock is correctly engaged.
Fig. 8
1. Push and plug together the upper and lower shaft sections together. Make sure that the
bump engages correctly.
2. Press the quick release coupler into the position. r